Cardstock & Kraft Paper Boxes

Flat-packed printed cartons in coated card or unbleached kraft — straight-tuck, crash-lock, auto-bottom and sleeves.

What this covers

The everyday printed box: one sheet of board, die-cut and creased, glued at the side seam and delivered flat. It is the cheapest way to give a product a shelf presence, and it is what most of the packaging trade means by “folding carton” — coated card and unbleached kraft are faces on the same construction, not two different boxes.

Flat is the whole point

A carton ships flat, so a few thousand of them are a couple of parcels on a pallet rather than a pallet of air. That one fact drives everything about the format: cheap to freight, cheap to store, quick to reprint.

The trade is that your packer does the last step — pressing the carton open and closing the flaps. That is normal for the format, and it is also where a badly creased carton shows up, as a flap that will not stay shut.

The fold is the weak point

A crease is a controlled break in the board’s coating, and a heavy ink film does not enjoy being broken. Large solid dark areas running across a fold line will crack and show white — after lamination, and often not until the box has been opened once.

Three ways out, cheapest first: keep the heaviest colour clear of the fold lines; use a fold-crack-resistant lamination; or accept it and check the printed sample at the fold rather than on the flat.

Kraft is a paper, not a structure

Underneath, a kraft box is creased and glued exactly like a coated one. What the unbleached board buys you is a single-material, plastic-free, recyclable story that reads well in the EU, and a look that photographs honestly.

What it costs you is print. Kraft is absorbent and dark, so four-colour photography goes muddy and large solids go patchy. Kraft boxes are at their best in one or two spot colours, plenty of bare board, and foil, embossing or a die-cut window where the design needs an accent.

Structures, and when each one wins

  • Straight-tuck — the default. Cheap, quick, ships flat, fine on a shelf.
  • Reverse-tuck — a cleaner top edge than straight-tuck for a small premium.
  • Crash-lock and auto-bottom — locks itself as it is opened, which is worth paying for wherever the packer fills boxes by the thousand.
  • Sleeve, and tray-and-sleeve — two pieces, so the printed part can be reprinted without touching the structure.
  • Hang-tab and Euro-hole — for pegboard and hook retail.

Colour across the set

Cartons are printed offset, so they hold a fine screen and a delicate gradient. Put one next to a wrapped rigid box or a printed can in the same campaign and the difference in surface becomes visible — which is why we print the set together and approve one ink drawdown for all of it.

WhatsApp