What this covers
The cup or can is the most-seen piece of packaging a drinks business owns. A customer holds it for ten minutes, photographs it and carries it down the street — so it works harder per unit than almost anything else in the set. This category covers the container itself: paper and plastic cups with their lids, glass bottles, aluminium and plastic cans, plus the sleeves, carriers, ends and straws that ship with them.
Paper, plastic, glass or aluminium
| Format | Best for | Watch out for |
|---|---|---|
| Paper cup, single-wall | Espresso and small hot drinks | Too hot to hold above ~8 oz without a sleeve |
| Paper cup, double-wall | Larger hot drinks, no sleeve needed | Higher unit cost, more storage volume |
| PP cup | Bubble tea, hot fill, film-sealed lids | Not clear; needs a printed wrap to look branded |
| PET cup | Iced coffee, smoothies, layered drinks | Cold only; cracks if knocked |
| Glass bottle | Cold brew, juice, sauces, premium retail | Freight weight and breakage |
| Aluminium can | RTD, craft soda, beer, sparkling | Empty cans ship as air; ends are a separate line |
| Plastic can | Powdered drinks, dry goods, wide mouth | Less premium in the hand than glass or metal |
The lining decides more than the artwork
A paper cup is board plus a barrier. Standard PE lining is cheap, seals reliably, and makes the cup difficult to recycle in most markets. Water-based and PLA linings exist and are improving, but they have a narrower temperature window and a shorter shelf life before the seal weakens: a real option for cold drinks, a harder one for a 90 °C hot fill.
Cans are printed on the curve
An aluminium can is formed first and printed second, which sets limits a carton does not have: the artwork wraps a cylinder that narrows at the neck, so the design has to survive the taper, and the palette is capped by what the dry-offset line can hold. A design approved on a flat proof will not look the same on the can. Where the palette matters more than the format, a printed shrink sleeve over a plain can buys back the colour range — at the cost of the sleeve and a second production step.
The ends are a separate supply line. Tell us the filling line’s closure spec, not just the can size, or the lids arrive that fit the can but not the filler.
One colour across the set
Cups are printed flexo, cartons offset, and cans, glass and tins are each decorated on a different surface entirely. The same Pantone reference lands slightly differently on every one. That is the argument for quoting and producing the set together: one ink drawdown, one approved standard, every component matched to it.
Glass is a tooling decision
A glass bottle or jar needs a mould before it needs artwork. Mould cost and the minimum kiln run set the real MOQ — which is why bespoke glass rarely makes sense for a first small batch, and why decorating a stock mould can put a premium bottle into production far sooner than a new shape can.