Tins & Tubes

Paper canisters and tinplate boxes — the rigid formats that carry tea, confectionery, candles and gift sets.

What this covers

Two formats that look similar on a shelf and are made in completely different ways: a paper canister and a tinplate box. Both are rigid, both are kept after the product is gone, and both are chosen when the container is meant to outlive the contents — a tea caddy, a biscuit tin, a candle drum.

Spiral or convolute

A spiral tube winds one narrow strip continuously around a mandrel. It is faster and cheaper at volume, but it leaves a visible diagonal seam that runs right through your artwork.

A convolute tube wraps a single pre-printed sheet around the mandrel instead. There is no diagonal seam, the artwork runs unbroken around the canister, and it costs more per unit because the sheet has to be cut to size before it is wound.

If your design has a continuous band, or any line of type that must not be interrupted, that decision comes before the print — not after.

The lining is the reason a tube works

A tube is a barrier before it is a box. Foil-lined board is what keeps tea and coffee out of the air; without it you have a handsome container that lets moisture in. Pair the lining with the end that suits the shelf life: a metal end or a foil membrane for anything oxygen-sensitive, a paper or plastic end where it is decorative.

Ask what shelf life the product needs and the structure follows. Choose the structure first and the shelf life becomes whatever the tube happens to give you.

A tin is printed flat, then formed

Tinplate gets the sharpest print of any metal format on this site: offset lithography goes onto the flat sheet, and only then is the sheet slit and formed into the tin. That is why a tin can hold fine type, gradients and photographic imagery that a drawn can cannot.

Embossing on the lid is a separate die and a separate pass, priced by the shape rather than by the number of colours — which is why the embossed lid is the classic move on a gift tin and also the line that most often blows a small budget.

Food contact on metal

A tin that touches food needs an internal lacquer, and the lacquer is a regulated food-contact material in its own right. Ask for the declaration of compliance for the specific coating and the specific market, not for “tinplate” in general — the alloy is the easy part; the coating is where the questions land.

WhatsApp